保定鸿远塑业有限公司

主营:塑料焊条 | PVC透明板 | PVC板 | PP板

日期:2019年05月28日 来源:本站原创 浏览:

(1)机器牢固法的第一步施工跟满粘法施工一样,每个人能够参照满粘法施工第一条,而后纵向搭接宽度为100mm,此中50mm做牢固件用,牢固件要穿过保温层,而后牢固覆于构造层上。
(2)先按计划的间距,用打击钻打孔,孔径不能太大,要小于牢固外径的尺寸,将牢固件就位后用螺丝刀拧紧,牢固件都牢固好后,对每一个搭接停止焊接,同样采取横向对接处置,上用200-250mm宽的卷材笼罩搭接,施焊。

(1) The first step of the machine solid method construction is the same as the full sticky method construction. Each person can refer to the full sticky method construction first, and then the longitudinal connection width is 100mm, where 50mm is used as a solid piece, and the firmware is to pass through the insulation layer. Then firmly overlay the tectonic layer.
(2) First, according to the planned spacing, punch holes with a blow drill, the aperture must not be too large, it must be smaller than the size of the secure outer diameter, the firmware is tightened with a screwdriver when it is in place, the firmware is firmly secured, and the welding is stopped for each connection. Horizontal docking disposal is also taken. Cover and weld with 200-250mm wide coil.

上一篇:PVC卷材地板和片材地板的区别
下一篇:聚氯乙烯(PVC)
相关文章列表